en Familiarising yourself with your appliance
If an appliance with climate class SN
is operated at colder room temperat-
ures, the appliance will not be dam-
aged up to a room temperature of
5 °C.
Niche dimensions
Observe the niche dimensions if you
install your appliance in the niche. If
this is not the case, problems may
occur when installing the appliance.
Niche depth
Install the appliance in the recom-
mended niche depth of 560 mm.
If the niche depth is smaller, the en-
ergy consumption increases slightly.
The niche depth must be a minimum
550 mm.
Niche width
An inside niche width of at least
560 mm is required for the appli-
ance.
Side-by-side installation
If you want to install two appliances
side by side, you must maintain a
distance of at least 150 mm between
the appliances.
Preparing the appliance for
the first time
Remove the informative material.
1.
Remove the protective foil and
2.
transit bolts, e.g. remove the ad-
hesive strips and carton.
"Clean the appliance for the first
3.
time." → Page 45
Connecting the appliance to
the electricity supply
Insert the non-heating appliance
1.
plug of the power cable into the
appliance.
38
Insert the mains plug of the appli-
2.
ance's power cable in a socket
nearby.
The connection data of the appli-
ance can be found on the rating
plate. → Fig.
Check the mains plug is inserted
3.
properly.
The appliance is now ready for
a
use.
Familiarising yourself with your appliance
Familiarising yourself
with your appliance
Familiarise yourself with the parts of
Familiarising yourself with your appliance
your appliance.
Appliance
You can find an overview of the parts
of your appliance here.
→ Fig.
1
Refrigerator compartment
A
Freezer compartment
B
Control panel
1
"Fruit and vegetable container"
2
→ Page 39
Rating plate
3
Frozen food container
4
Door storage compartment for large
5
bottles
Note: Deviations between your appli-
ance and the diagrams may differ
with regard to their features and size.
Control panel
You can use the control panel to con-
figure all functions of your appliance
and to obtain information about the
operating status.
→ Fig.
2
/
1
3