Publicité
Les langues disponibles
Les langues disponibles
Function
A »mona« monitoring system consists of at least one door monitor and
a »mona« video receiver. Up to four transmitters can be registered on
to one video receiver.
When the door monitor's bell button is pushed, a radio- and image signal
is transmitted to the »mona« video receiver. The receiver indicates the
signals through sound and images on its display.
Safety instructions
•
Before putting the devices to use, please read this manual comple-
tely and thoroughly.
•
Keep the manual safe, so that other users have access to it when
needed.
•
When using power tools, please follow their manufacturers instruc-
tions and use protective gear (e.g. safety goggles)
•
Before drilling into walls, please make sure that no hidden power
lines or water pipes are underneath. If in doubt, we recommend
using a cable / pipe detector.
Inserting the power pack into the video receiver
A power pack is included with the video receiver. Slide the battery
compartment open and connect the power pack with the socket. Make
sure that it is plugged in the right way round! Insert the power pack into
the battery compartment, then slide the lid back on.
EN
English 19
Publicité
