Alpine DVR-C320S Guide De Référence Rapide page 14

Installing the product
1. Remove the protective fi lm from the bottom of the product, and then attach
the product to the installation location.
2. Set the vertical angle of the camera appropriately
To confi rm the camera angle, record a video after installation and check the
video using the Alpine navigation/display audio system or the ALPINE
Recording Viewer application. If necessary, adjust the camera angle again.
➊ ➊
Select an installation location that can
record the entire view in front of the
vehicle without obstructing the driver's
vision. Ensure that the front camera lens
is located in the center of the windshield.
Should not be installed on vehicle
equipped with front radar or front
camera ADAS systems.
➋ ➋
13