Technical Characteristics; Technical Specifications, Drill Stands; Ec Declaration Of Conformity; Controls - Baier BST 200 Traduction Du Mode D'emploi Original

EN
3

Technical Characteristics

3.1

Technical specifications, drill stands

Drill stand
Manufacturer
Maximum drilling stroke (mm)
Maximum diameter drilled (mm)
Height (mm)
Width (mm)
Depth (mm)
Weight (kg)
Fastening drive unit/drill to the spindle head via the
motor collar
Fastening drive unit / drill
to the spindle head via the mounting plate
3.2

EC Declaration of Conformity

We confirm with sole responsibility that
these products comply with provisions of
the Directives:
2006/42/EC (Machinery Directive)
2011/65/EU (RoHS Directive)
in conjunction with the safety instructions
documented in the instruction manual and
the specified intended use.
The head of development is authorised to write
the technical documents.
These are available from:
Maschinenfabrik OTTO BAIER GmbH,
Heckenwiesen 26,
71679 Asperg
Thomas Schwab
Managing Director
Asperg, 05.12.2018
| 22 |
Germany
Robert Pichl
Factory Manager
BST 200
Maschinenfabrik OTTO BAIER GmbH
570
200
900
320
600
15.5
Yes
–
3.3

Controls

BST 200 and BST 250 drill stands
1
1 Sliding element
2 Nut, top tilt adjustment
3 Pinion shaft
4 Tube lock with clip
5 Feed crank handle
6 Tapered shaft
7 Spirit level
8 Drill stand plate
9 Nut, bottom tilt adjustment
10 Adjustable foot (4x)
11 Cheese head screws, bottom tilt adjustment
12 Cheese head screws, machine collar
(BST 200 only)
13 Machine collar (BST 200 only)
14 Bolt-on plate (BST 250 only)
15 Cheese head screw (4x) (BST 250 only)
16 Circlip
17 Spindle head
18 Hexagon bolt
19 Clamping lever
20 Drill stand column
BST 250
570
250
900
320
850
15.4
–
Yes