Product Description; Designated Use; Technical Data; Noise Emission Values - erba 33257 Mode D'emploi

GB - INSTRUCTION MANUAL

2. PRODUCT DESCRIPTION

1 – Base support
2 – Clamp
3 – Bolt (M12 x 60)
4 – Upper support
5 – stabilizer
6 – Safetypin
7 – Support/Swivel arm

3. DESIGNATED USE

The support arm is designed to be used as a support for hoists. The support arm must be installed
on a steel pole with a diameter of at least 48 mm and a wall thickness of at least 4 mm. Any other
use is prohbited. The buyer accepts all liabilities, legal and otherwise, for any damage or injury re-
sulting from improper use of the product (i.e. any other use than the above stated designated use).
4. RESTRICTIONS
Please note, that this product is not designed for commercial or industrial use. We accept no liability
or warranty claims should the product be used in industrial and/or commercial operations.

5. TECHNICAL DATA

Max. load at 1100 mm
Max. load at 750 mm

6. NOISE EMISSION VALUES

See technical data.
ERBA GmbH
A-1230 Wien
Talpagasse 6
Servicehotline: Tel: +43(0) 1 930 10 - 160 · Fax: +43(0) 1 930 10 - 960 · E-Mail: service@erba.at
8 – Safetypin (big)
9 – Support arm extension
10 – Bolt (M12 x 70)
11 – Bolt (M8 x 60)
12 – Fixing hole
13 – End cap
Page 11
Instruction manual
Issue: 12/2018
Changes, print, punctuation and other errors reserved!
300kg
600kg
33257