Product Description; Designated Use; Technical Data; Noise Emission Values - erba 03168 Mode D'emploi

GB - INSTRUCTION MANUAL

2. PRODUCT DESCRIPTION

1 – Manometer
2 – Upper hydraulic cylinder
3 – Pressure hose
4 – Pump arm
5 – Pressure plates
6 – Lower hydraulic cylinder
7 – Worktable

3. DESIGNATED USE

The hydraulic shop press is designed to apply pressure to objects up to 20 t (see technical data).
Typical applications are the removal of axle bearings, transmission bearings, seals, u-joints, etc.
Any other use is prohbited. The buyer accepts all liabilities, legal and otherwise, for any damage or
injury resulting from improper use of the product (i.e. any other use than the above stated desig-
nated use).
4. RESTRICTIONS
Please note, that this product is not designed for commercial or industrial use. We accept no liability
or warranty claims should the product be used in industrial and/or commercial operations.

5. TECHNICAL DATA

20t
Max. Pressure:
Working surface: ca. 0-910mm
ca. 190 mm
Piston travel lenght:
ca. 101,5 kg
Weight:

6. NOISE EMISSION VALUES

-
Page 12
Instruction manual
ERBA GmbH
03168
A-1230 Wien
Issue: 11/2017
Talpagasse 6
Changes, print, punctuation and other errors reserved!
Servicehotline: Tel: +43(0) 1 930 10 - 160 · Fax: +43(0) 1 930 10 - 960 · E-Mail: service@erba.at