Technical Data; Note; Warning - TOOLCRAFT T-SBM 710 W Notice D'emploi

13. Technical data

Rated voltage...............................................................................220-240 V/AC, 50-60 Hz
Rated power input........................................................................710 W
Speed, n0......................................................................................0 – 2800 /min
Collet diameter..............................................................................max. Ø 13 mm
Drilling capacity............................................................................ Steel: 10 mm
Level of acoustic pressure LpA.....................................................94,4 dB(A); KpA=3 dB(A)
Level of acoustic power LwA........................................................105,4 dB(A); KwA=3 dB(A)
Level of vibration (K=1.5 m/s²).....................................................Drilling into metal:
Main handle: αh,D= 4,507m/s²
Auxiliary handle: αh,D= 3,401m/s²
Main handle: αh,ID= 12,398m/s²
Auxiliary handle: αh,ID= 13,463m/s²
a) Note
• The declared vibration total value has been measured in accordance with a standard test method and may be used
for comparing one tool with another.
• The declared vibration total value may also be used in a preliminary assessment of exposure.
b) Warning
• The vibration emission during actual use of the power tool can differ from the declared total value depending on the
ways in which the tool is used.
• Avoid vibration risk.
Wear glove during operation.
Limit operating time and shorten trigger time.
Concrete: 13 mm
Wood: 20 mm
Impact drilling into concrete:
31