S&P VFKB 24 Notice De Montage Et D'utilisation page 19

1- General Performance Specifications
2- Electrical Rating
3- Dimension
4- Control Layout
5- Jumper Selectable Features
6- Wiring Instructions
6.1- AC line input connection
6.2- Ground connection
6.3- Motor connection
6.4- Run/Fault relay connection
7- Setting Selectable Jumpers
7.1- Models VFKB-24 and VFKB-27 AC line input voltage selection (jumper J1)
7.2- Motor power selection (jumper J2)
7.3- Automatic ride-through or manual start selection (jumper J3)
7.4- Drive output frequency selection (jumper J4 and J5)
7.5- Run/Fault output relay operation selection (jumper J8)
8- Mounting Instruction
9- Drive Operation
9.1- Start-up procedure
9.2- Starting the drive after a fault has been cleared
10- Diagnostic LEDS
10.1- POWER ON LED
10.2- STATUS LED
11- Trimpot Adjustments
11.1- Minimum speed – MIN
11.2- Maximum speed – MAX
11.3- Acceleration – ACCEL
11.4- Deceleration – DECEL
11.5- JOG
TABLE OF CONTENTS