Use; Height Adjustment - Hurricane HBKT Perfekt 60 Manuel D'utilisation

Use

Before use, follow the instructions for readying the motor in the motor
instruction manual.
Before using the machine, remove all foreign objects from the vicinity. Stones, glass,
branches and similar items can damage the sweeping machine. Also check that all bolts
are tightened.
Control oil level before starting the motor.
Start:
Set the throttle to fully open.
Follow motor start instructions.
Stop:
Set the throttle to minimum gas.
Follow motor stop instructions.
The sweeper drives forward by quick activation of upper right clutch handle (h).
Figure 2:
The sweeper drives backward by quick activation of lower right clutch handle (i).
Figure 2:
Sweeper brush is activated by quick activation of upper left clutch handle (g).
Figure 2:
The sweeper is equipped with a "dead man's handle", which is to say that if the handles
are let go, the movement of the brush and the machine will stop.
In case of an accident one needs to release the handles as quickly as possible and stop
the engine.
IMPORTANT !
REMEMBER TO FILL ABOUT
0,6 L WITH ENGINE OIL SAE-30
BEFORE START!

Height adjustment

Once the brushes begin to wear, it becomes necessary to readjust how close the brushes
are to the working surface. Height adjustment is performed by moving the plastic rings on
the brush support wheel. This moves the support wheel higher, and thus lowers the brush
toward the working surface.
Figure 6 and 7.
13