Alecto COA26 Mode D'emploi page 44

Automatic display mode of each record:
The automatic display mode automatically refers to all recorded log data in order from C0 to C9. The screen
automatically displays all values.
The sequence number shown on the screen has an additional symbol "=" to indicate that the automatic
display mode is enabled.
Press "long" on the "MENU" button. When the display shows "C0=", stop pressing to view the automatic
display mode of each record. During display, press the "TEST" button to quickly change records and press
the "MENU" button to exit the display mode.
The numerical values displayed with the sequence number is the value associated with the sequence.
Values without "ALARM" indicate that no alarm occurred, and the recorded value is the highest
concentration throughout the sequence.
Values with "ALARM" indicate that an alarm occurred, and the recorded value is the concentration when the
alarm occurred.
4. Deleting recordings:
Shortly press the "MENU" button and select "dELl" and press the "TEST" button to delete all 10 records at
once.
44