Publicité
Les langues disponibles
Les langues disponibles
1 : Place the grid holder in front of the side holes.
2 : Snap the grid holder in the side holes (as shown on the pictures).
First cleaning
Clean the device and accessories with soapy water or washing liquid before the first
use. (See 6 Cleaning)
Connection of the device
- Check that the tension and the frequency of the electricity network suit to the
values indicated on the descriptive plate.
- Make sure that every control knob is positioned on 0.
- Check that neither the cord nor the plug are damaged.
- Unwind completely the electric power cable and connect it in a plug connected
with the earth.
- The device is connected.
NB: in case of connection of the device in a plug without earth protection or directly
on the electricity network, confide its connection to a qualified person .
c) Use of device :
Elements of command and display
Command/Display
Switch (n°2 on picture)
Electronic thermostat (n°1 on
picture)
Switch (n°3 on picture)
N° 4
Function
On/Off
Temperature setting
On/off ventilation
17
Publicité
