afriso OM 1 Notice Technique page 71

5.5 Mounting the control unit
Mount the control unit to the wall using mounting type A or B.
 Verify that the control unit is mounted to an even, rigid and dry wall at eye
level.
 Verify that the control unit is accessible and easy to oversee at all times.
 Verify that the control unit is protected against water and splash water.
 Verify that the control unit is protected from direct atmospheric influences
if it is installed outdoors.
Fig. 5: Control unit with mounting frame for panel mounting; right: control panel cut out
Mounting
OM 5 / OM 5+1 / OM 1
EN
20