English - AEG PerfectAroma KF75 Série Mode D'emploi

ENGLISH

Thank you for choosing an AEG product. In order to ensure the best results, always use original AEG accessories and
spare parts. They have been designed especially for your product. This product is designed with the environment in
mind. All plastic parts are marked for recycling purposes.
COMPONENTS
A. Control panel
B. Water tank
C. Water level indicator
D. Hinged lid
E. Filter holder with antidrip valve
F. Coffee jug and jug lid
G. Warming plate
Picture page 2-3
GETTING STARTED
1
Setting/changing time. Plug in the machine, the display will flash the initial time showing: 12:00. Press the HOUR and
MIN button to set the required time. Time can be changed at any time, even under program mode. Simply press the
HOUR and MIN button, the time changes at once. Note: if you unplug the machine, the time needs so be set again.
2
Place the machine on a flat surface. When starting the machine for the first time, fill the tank with cold water. Start
the machine with the ON/OFF switch. Let a full tank of water pass through the machine once or twice to clean it,
without using paper filter or coffee.
3
Making coffee: open the lid and fill the water tank with fresh cold water up to the desired level. There is a water level
indicator on the water tank and on the coffee jug. (The machine must not be used with empty tank!)
4
Insert a size 1x4 paper filter in the filter holder and fill it with ground coffee. There is a gauge for recommended
number of spoons of coffee next to the water gauge. For average strong coffee 1 measuring spoon (approx. 6-7 g) per
cup is sufficient. Close the water tank lid and place the jug back (complete with lid).
5
Setting/changing delay time. Press and hold PROGRAM button more than 1 second, then release the PROGRAM
button, the green program light flashes, set hours by pressing the HOUR button. Then set minutes by pressing the
MIN button. Press the PROGRAM button again to confirm, the display will go back to show the current time immedi-
ately, and display show "auto" symbol, green program light illuminate.
6
Setting/changing delay time. Note: If user don't press program button again, the display will go back to show
the current time after 5 seconds, and setting delay time is cancelled.
7
Start the machine with the ON/OFF switch. The power indicator light will come on and hot water will flow into the
filter. If the machine is not turned off manually, the Safety Auto-Off function turns it off after 40 minutes.
8
If the jug is removed, the filter valve prevents coffee from dripping onto the warming plate. (While preparing coffee,
the jug must not be removed for longer than 30 seconds or the filter will overflow.)
9
The Aroma Selector extends the brewing time to maximize the flavour extraction and get a stronger coffee for a
small number of cups (normally less than 6). Press
strong coffee.
CLEANING AND CARE
10
Turn the machine off and unplug the power cord. Wipe all outer surfaces with a damp cloth. Coffee jug and jug lid
are dishwasher proof. Never use caustic or abrasive cleaners, and never immerse the machine in liquid!
11
To clean the filter holder, lift up the handle and remove the filter holder. To clean the filter valve thoroughly, push it
several times while it is being rinsed. The filter holder can also be washed in the dishwasher.
DECALCIFYING
12
As a precaution we recommend descaling after 70 uses. Use only an environmentally friendly descaling agent and
always follow the manufacturer's instructions.
www.aeg.com
KF75xx_Coffemaker_AromaPerfect_ AEG_NO-FARSI.indd 6
H. Power cord & plug
I. ON/OFF switch with power indicator light
J. Program button
K. Display
L. Hour button
M. Minute button
N. Aroma button
, once for mild strength, twice for medium and 3 times for
6
2017-07-06 15:27:36