Important notes for using the Algae Management Colorimetric
Comparator Test Kits
Before testing clean the glass vials and the large syringe by rinsing it with the water to be
•
tested.
After testing rinse all syringes and vials with RO or distilled water before storing. If vials are
•
left unwashed a residue can form that will affect the results of future tests. Use a slightly
acidic solution such as vinegar to remove the residue.
In order to ensure an accurate drop size always hold reagent bottle vertically above the
•
test vial, and gently squeeze out each drop
•
Close all reagents tightly immediately after use.
The test reagents are stable up to the date stated on each bottel when stored closed
•
between 15 – 25 °C.
Store the reagents and color card in the plastic box to prevent damage from prolonged
•
exposure to light.
: Table below gives the values for N-NO
N-NO
3
NO
Low Range
(ppm)
N-NO
NO
High Range
(ppm)
N-NO
: Table below gives the values for P-PO
P-PO
4
PO
Low Range
(mg/L)
P-PO
PO
High Range
(mg/L)
P-PO
0.25
0.50
3
0.013
0.007
3
8.00
4.00
3
0.91
1.82
3
0.01
0.02
4
0.003
0.007
4
0.17
0.34
4
0.06
0.11
4
the Nitrogen content of Nitrate
3
0.75
1.00
0.053
0.027
12.00
16.00
3.64
2.73
the Phosphorus content of Phosphate
4
0.08
0.04
0.013
0.026
0.68
1.36
0.22
0.44
Algae Management | 5
2.00
4.00
0.120
0.91
64.00
32.00
14.55
7.27
0.12
0.16
0.052
0.039
2.04
2.72
0.67
0.89
GB