Télécharger Imprimer la page

Bresser MicroSet 300 Série Mode D'emploi page 10

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
RISK to your child.
Aids with sharp edges and tips are
sometimes
used
with
vice. Please store the device and all of its
accessories and aids out of the reach of
children. There is a risk of INJURY.
This
device
contains
electronic
ponents that are powered by either a mains
connection or batteries. Never leave a child
unsupervised
with
this
device should only be used as per these
instructions otherwise there is a serious
of
ELECTRICAL SHOCK.
Batteries should be kept out of children's
reach. When inserting batteries please
ensure the polarity is correct. Leaking or
damaged batteries can cause injury if they
come into contact with the skin. If you need
to handle such batteries please wear suitable
safety gloves.
Children should only use this device under
supervision.
Keep
packaging
(plastic bags, rubber bands, etc.) away from
children. There is a risk of
SUFFOCATION.
The chemicals and liquids provided should
be kept out of reach of children. Do not drink
the chemicals! Hands should be washed
thoroughly under running water after use.
10
In case of accidental contact with the eyes
or mouth rinse with water. Seek medical
this
de-
treatment for ailments arising from contact
with the chemical substances and take the
chemicals with you to the doctor.
FIRE-/ DANGER OF EXPLOSION!
com-
Do not expose the device to high
temperatures. Use only the mains
adapter supplied or those battery types
device.
The
recommended. Never short circuit the
device or batteries or throw into a fi re.
RISK
Exposure to high temperatures or misuse of
the device can lead to short circuits, fi re or
even explosion!
RISK of material damage.
Never take the device apart. Please
consult your dealer if there are any
defects. The dealer will contact our service
centre and send the device in for repair if
needed.
Do not subject the device to temperatures ex-
materials
ceeding 60 C.
TIPS on cleaning
Remove the device from it's energy
source before cleaning (remove plug
from socket / remove batteries)
Clean the exterior of device with a dry cloth.
Do not use cleaning fl uids so as to avoid
causing damage to electronic components.
Clean the lens (objective and eyepiece) only
with the cloth supplied or some other soft
lint-free cloth (e.g. micro-fi bre). Do not use
excessive pressure - this may scratch the
lens.
Protect the device from dust and moisture.
Store the device in the bag supplied or in
its original packaging. Batteries should be
removed from the device if it is not going to be
used for a long period of time.

Publicité

loading

Ce manuel est également adapté pour:

Microset 1200 série88-51000