Customized Cycle Program Mode - Honeywell HVC0001 Guide Du Propriétaire

Owner's Guide 400-305-000-EFS

Customized Cycle Program Mode

The icon appears when the controller is in Customized Cycle Program Mode. In
this mode, you set the Run (On) Period and the Idle (Off) Period for the fan. Each
period can be set between 10 minutes and 120 minutes in increments of 5 minutes.
The controller will cycle between the two periods. For example, if you set the Run
Period to 10 minutes and the Idle Period to 20 minutes, you have established a
cycle of 30 minutes. During every cycle, the fan will turn On for 10 minutes and Off
for 20 minutes.
NOTE: Refer to the menu flowchart sheet on how to place the controller in Customized Cycle Program
Mode and how to set the Run Period and Idle Period.
Temporary override
Press the main button to temporarily turn the fan On or Off. For example, if you press the main button to
turn the fan On during the idle period, the fan will remain On until the beginning of the next idle period or
until you press the main button again.
12