Bosch PDO Multi Instructions D'emploi page 11

Functional Description
Intended Use
The measuring tool is intended for the detection of metals (ferrous and non-
ferrous metals, e.g., rebar), joists and "live" wires/conductors in walls, ceil-
ings and floors.
Product Features
The numbering of the product features shown refers to the illustration of
the measuring tool on the graphic page.
1 Illuminated ring
2 Marking hole
3 Display
4 "ZOOM" button
5 Wood-detection button
6 Metal-detection button
7 "on/off" button
8 Felt pads
9 Sensor area
10 Battery lid
11 Pencil for marking (removable)
12 Latch of battery lid
Display Elements
a "Live" wire indicator
b Wood detection indicator
c Metal detection indicator
d "ZOOM" function indicator
e "ZOOM" measuring indicator
f Measuring indicator
g "AutoCal" calibration indicator
h Indicator for magnetic metals
i Indicator for non-magnetic metals
j Switched-off audio signal indicator
k Battery indication
1 609 929 J68 • 30.1.06
Optimal working with the measuring tool is possible
only when the operating instructions and informa-
tion are read completely, and the instructions con-
tained therein are strictly followed. SAVE THESE
INSTRUCTIONS.
Please unfold the fold-out page with the representation of
the measuring tool and leave it unfolded while reading the
operating instructions.
English–1