Appliance Overview - Glatz CASTELLO Pro Notice De Montage Et D'utilisation

Appliance overview

indirect
direct
LED light
(optional)
Installation and operating
instructions
Remote
(optional)
Open / close parasol
Struts
Radiant heater
Slide
Tensioning lever
Support tube cover
Support tube
Open the parasol
1. Remove any protective cover
2. Release binding belt
3. Open parasol with the help of the slide
4. Align any heating elements
5. Pull down the tensioning lever and
hook it in place
6. Lock the tensioning lever in the down
position
!
Make sure that the tensioning lever is
locked. To engage the tensioning lever, it
may be pulled downwards with force.
Close parasol
1. Allow any heating elements to cool
down for at least 30 minutes
2. Release tensioning lever, close parasol
3. Close any heating elements
4. Pull out / wrap fabric segments
5. Apply binding belt
6. Apply protective cover if necessary
!
Only wrap / pack completely dry parasols.
28 29
Controlling the light and heat
(optional)
Pilot light
White light
Coloured light
Light
colour
Radiant
heater
Motor
All lights**
Lights / heating
Changing the battery on the remote control
• Always keep batteries out of the reach of children. If a battery is swallowed,
seek medical help immediately.
• In case of incorrect use, there is a risk of explosion.
• Always pack batteries when storing or disposing of them to prevent
discharge, ignition or damage.
• Always dispose of batteries properly in accordance with the current law.
CR 2430
• To control the functions, tap the buttons
several times or keep them pressed down.
• You can mix white or coloured light to suit
your preference by using the appropriate
buttons.
• Light and heating only work when the parasol
is open.
touch on
direct > both > indirect > off*
direct > both > indirect > off*
> > > > > > > > auto brighter / darker
direct > both > indirect > off*
without function
direct > both > indirect > off
All off without saving >
saved light scenario on
* The last setting will be saved
** Keep button 1 or 2 pressed down to change the colour temperature
1
Open cover
!
Do not lose screw, and carefully detach
cover.
2
Replace battery, close cover
!
Use battery type CR 2430 and ensure
that the polarity is correct! Tighten screw
again carefully.
press and hold
brighter / darker
brighter / darker
brighter / darker
Save current light-
ing scenario