Télécharger Imprimer la page

Güde GHS 4200 PIEZO Traduction Du Mode D'emploi D'origine page 19

Masquer les pouces Voir aussi pour GHS 4200 PIEZO:

Publicité

or persons with reduced physical, sensory or mental skills
or with a lack of experience and knowledge, they must be
supervised or instructed in the safe use of the appliance
and understand the resulting risks. Children must not play
with the appliance. Cleaning and user maintenance must
not be performed by children without supervision.
Training
Using the appliance only requires appropriate instructions
by an expert or reading the Operating Instructions. No
special training necessary.
Service
Any technical questions? Complaint? Do you need
spare parts or operation manual?
Go to our website www.guede.com and the section
Service will help you quickly and without bureaucracy.
Please, help us to help you. In order to identify your device
in case of complaint, please indicate serial number, order
number and year of manufacture. All information is
available on the product label. To have all information
always at hand, put them down.
Serial number:
Order number:
Year of manufacture:
Phone:
+49 (0) 79 04 / 700-360
Fax:
+49 (0) 79 04 / 700-51999
E-Mail:
support@ts.guede.com
Important information for the customer
Please be sure to know that returning the product in or
after the warranty period must be made in the original
packaging.
Maintenance and storing
To clean the appliance, use a smooth and fine soap water
solution. Prevent any direct contact of aggressive cleaning
agents with the appliance. No aggressive, volatile or
caustic cleaning agents may be used.
Have the socket heater checked by a qualified authorised
expert once a year.
The hose must necessarily be replaced if damaged.
Protect the appliance against moisture and dust.
If the appliance has not been used for a long time, remove
it from the gas bottle, cover the heater surface and put it to
a dry, safe place inaccessible to children.
Troubleshooting
Failure
Cause
No gas
Gas bottle is
empty
Valve on the gas
bottle is closed.
Safety valve on
building dryer is
closed
Burner flame has
Thermal element
extinguished
has not been
during operation
warm enough.
Gas bottle is
Remedy
Change the gas
bottle.
Open the valve.
Try restarting.
Try restarting.
Change the gas
19
empty
bottle.
Wind or draught
Put the appliance
has extinguished
out of reach of wind
the flame.
and draught, let it
cool down for a
couple of minutes
and try to restart it.

Publicité

loading

Ce manuel est également adapté pour:

17306