Never turn the gas bottle upside down, even if it
seems to be empty! It could cause the hose to
get clogged with remains from the gas bottle and
therefore a risk of fire and immediate damage to
the appliance.
Never remove the safety screen and/or other
parts of the burner.
Keep children in a safe distance from the burner.
Never let the appliance unattended!
Instructions for installation and first putting the
appliance into operation
Never use the appliance near flames, sparks and
flammable substances.
MINIMUM DISTANCE OF 2 M TO BE NECESSARILY
KEPT!!!
Fitting the appliance to the gas bottle (pic. 2-5)
Step 1
Make sure all components are standing safely. Make sure
the socket heater, gas hose and gas bottle are safe.
Step 2
To fix the stand (3) on the bottle, use the clamping screw
(4).
Step 3
Screw the pressure controller (11) and the gas hose (10)
on the gas bottle valve.
Step 4
Use the wing nut (8) and the toothed disk (9) to put the
heater to the required position and fix it on the stand (3).
Step 5
Screw the other end of the gas hose (10) to the safety
valve (7).
Step 6
Make sure all the screwing is tight.
Before putting the appliance into operation, check
necessarily the screw caps for any gas leak using a
leak detection spray or lye soap. Retighten them if
necessary.
Changing the gas bottle
Whenever being outdoors alone, keep distance
from the flames or sources of fire and proceed
as follows!
Close the gas bottle valve.
Unscrew the pressure reducing valve (11).
Unscrew the clamping screw (4) and remove the
appliance.
Find out if there is pressure controller sealing in
place.
Put the appliance on a new gas bottle and
continue as specified in "Instructions for
installation and putting the appliance into
operation".
Marking
Product safety:
Product corresponds to
applicable EU standards
Prohibitions:
No fire!
No operation in enclosed
spaces!
17
No smoking!
Warning:
Warning/Caution
Bystanders must keep safety
distance
Commands:
General command sign
Secure the gas bottle against
turnover
Environment protection:
Dispose waste professionally
so as not harm the
environment.
Any defective and/or disposed
electric or electronic devices
must be delivered to
respective collection centres.
Package:
Protect against moisture
Interseroh-Recycling
Technical specifications:
Rated thermal load
Nozzle
Warning against hot
surface
To be used outdoors only
and necessarily protected
against moisture.
Please read the Operating
Instructions before using
the machine
Packing cardboard material
may be delivered to
collecting centres for
recycling.
This side up
Weight
Operating pressure