Start/Pause Button; Function Indicator Lights; Function Buttons - Durabase WM 1010 Mode D'emploi

START/PAUSE BUTTON

Used to start a selected program or pause during running.
WARNING!
It is required for the program knob to be brought to O(off)
position before selecting the program or changing a continuing
program.

FUNCTION INDICATOR LIGHTS

When the start/pause button or any function button is pressed,the
corresponding light turns on.The light turns off when the function
button or start/pause button is re-pressed, or when the process
the selected function is completed.
The function indicator lights are also used in failure detection system
mentioned in section 9.

FUNCTION BUTTONS

No spin
This program is recommended to be used for your sensitive
clothes on which no spinning should be done. By pressing this
function button, you can cancel the spinning process which is
included in the program.
Cold wash
When this button is pressed, your clothes are washed with
cold water. With this function, you can wash your slightly dirty
clothes using less energy and water.
88