Publicité
Les langues disponibles
Les langues disponibles
EN
1
Notes on documentation
The PDU portfolio comprises a standard range available off the shelf, together with customised PDUs
that are built to order. All PDUs from our standard range have the typical 7-digit Rittal Model No., while
customised PDUs have a unique 7-digit KID number (beginning with a letter, such as y) for easy iden-
tification and reordering.
The precise technical PDU description is stored in an alphanumerical "PDU ID", which should be quoted
when requesting servicing of customised PDUs.
This information can be found on the PDU rating plate. Additionally, this and other product information
(serial number etc.) can also be retrieved from the PDU website if necessary and via the display, by us-
ing a QR code.
With the display switched on, the QR code is displayed by pressing and holding down the "ESC" key
for 3 s (fig. 15, item 10) until the display timeout is reached or any other key is pressed.
The following operating instructions refer to the PDU standard range, unless otherwise stated in the
text. Minor deviations may arise during assembly and commissioning when using a built-to-order PDU.
This Installation and Short User's Guide is intended for experienced, trained specialists and contains
only the most important information concerning the assembly, installation and function of the PDU in-
ternational/PDU UK power distribution unit (subsequently referred to as the PDU).
1.1
Other applicable documents
– Assembly, installation and operating instructions for the PDU international/PDU UK power distribution
unit.
These are available at www.rittal.com and contain comprehensive application-relevant information and
technical data for the PDU with regard to:
– Details concerning the electrical connection
– Functions and services
– Configuration options
– Detailed operating instructions
– Troubleshooting
The assembly, installation and operating instructions for the sensors in the CMC III system, which may
be connected to the PDU, are also available on this website.
– Temperature sensor (7030.110)
– Temperature/humidity sensor (7030.111)
– Infrared access sensor (7030.120)
– Vandalism sensor (7030.130)
1.2
Storing the documents
These instructions as well as all applicable documents are an integral part of the product. They must
be issued to everyone who works with the unit and must always be available and on hand for operating
and maintenance personnel.
2
Safety instructions
– Assembly and installation of the device may only be performed by experienced, trained specialists.
– The PDU housing must not be opened.
– The PDU must not come into contact with water, aggressive or inflammable gases or vapours.
– The PDU may only be operated within the specified environmental conditions (see section 3.3).
Note:
Further safety instructions in all EU languages can be found on page 2 to 4.
Rittal PDU international/PDU UK power distribution unit
Notes on documentation, Safety instructions
EN
25
Publicité
