Display Language Selection; Using Cups, Mugs And Glasses; Loading The Capsules; Coffee/Beverage Dispensing - Saeco OFFICE One SUP028R Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Use of the machine - User Manual
4.3

Display language selection

The machine is designed to display the messages in several languages.
By pressing the buttons (18) and (19) contemporarily, it is possible to scroll the
languages supported by the machine. To set a language, release the 2 buttons
when the desired language is displayed, for example:
¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼
¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼
¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼
English
¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼
The display now shows the messages in the selected language.
Note: the language can be selected at any time while the machine
is operating, except during dispensing of hot water or steam.
4.4

Using cups, mugs and glasses

Warning! Do not use containers that stick out from the edge of the
grills they are resting on.
The machine is designed to correctly dispense beverages in small cups and/or
larger-sized containers.
The cups and/or mugs must be correctly positioned beneath the brew group.
Note: if the cups and/or mugs are not correctly positioned beneath
the brew group, the beverage may spill out of its container.
When using small cups, lower the upper cup holder grill (Fig. 04, pag. 3).
When using larger cups, mugs and/or glasses, use the lower grill; gently lift the
upper cup holder (Fig. 05, pag. 3).
4.5

Loading the capsules

Warning! To prepare the desired beverages, use only capsules
supplied directly by the service provider.
Each capsule is designed and made to prepare a single serving.
Do not use capsules other than those supplied by the service pro-
vider, coffee beans, preground and/or freeze-dried coffee.
Do not reuse the same capsule to prepare two or more beverages.
To insert a capsule, it is necessary to open the loading tray.
Note: for machines equipped with "Tag Reader", please see also
chapter 5.
To open the tray, pull it out completely (Fig. 06, pag. 3).
¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼
Saeco Office One
¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼
The display will show:
Insert capsule
¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼
Close pod tray
¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼
Warning! Do not attempt to force it out beyond the limit.
Take a single capsule by hand and place it in the depression in the tray
(Fig. 07, pag. 3).
Warning! The capsule must be positioned as shown in the picture.
• 30 •
Note: the capsule must be fi tted into place without using any fur-
ther tools; after the fi rst brewing cycle, the capsule can no longer
be extracted.
When the capsule is correctly positioned, close the tray (Fig. 08, pag. 3).
¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼
Saeco Office One
¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼
The display will show:
Ready
¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼
Select product
¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼
Warning! If you meet with any resistance when closing the tray,
check the position of the capsule.
It is forbidden to place fi ngers or any objects other than capsules
supplied by the service provider inside the tray.
Now the capsule has been inserted and the user is prompted to select the
desired beverage (Fig. 09, pag. 3).
4.6

Coffee/beverage dispensing

Before dispensing a coffee/beverage make sure that:
1 the machine has warmed up and is ready for use (see section 4.2);
2 the capsule has been correctly positioned;
3 a cup and/or mug suitable for the selected product is placed beneath the
brew group.
Espresso brewing (Fig. 10, pag. 3)
Press the espresso button. The machine will automatically brew the coffee. On
reaching the quantity programmed by the service provider, the machine will
automatically stop brewing.
Coffee brewing (Fig. 11, pag. 3)
Press the coffee button. The machine will automatically brew the coffee. On
reaching the quantity programmed by the service provider, the machine will
automatically stop brewing.
Long coffee brewing (Fig. 12, pag. 3)
Press the long coffee button. The machine will automatically brew the coffee.
On reaching the quantity programmed by the service provider, the machine will
automatically stop brewing.
After the beverage has been selected, the machine will carry out a prebrewing
cycle.
¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼
Saeco Office One
¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼
The display will show:
Prebrewing
¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼
Wait please...
¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼
Note: the coffee brewing can be stopped at any time by pressing
one of the 3 coffee buttons available.
Saeco Office One
¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼
¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼
Short Product
¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼
Press a key
to end
¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼
On completion of the brewing operation the display will show:
¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼
Saeco Office One
¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼
¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼
End brewing
¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼¼
Wait please...
The machine will automatically discharge the used capsule into the dreg drawer
and be ready for the next brewing cycle.
.

Publicité

Table des Matières
loading

Table des Matières