USER GUIDE
ITCOMBO100
external call will be put on hold. If only one handset registered with a base, just press INT key.
When the other handset (or the base) answers the call, press STAR key on the handset (HS1) to
connect the three parties together.
To end the conference call, either party hangs up and the other party will be left connected to
the external call.
One-touch memory
Store the number into one-touch memory
In on-hook state, pre-dial a number or scroll to the desired incoming number
Press & hold M1 for 2 seconds, with a "DI DU" sound being heard, the number is stored.
Dial out number from one-touch memory
In on-hook or off-hook state, press M1 key, the number is dialed out.
Delete one-touch memory
In on-hook state, press
key twice, then press and hold M1 key to delete it.
To Lock/Unlock the Keypad of Handset
To lock the keypad
Press and hold the STAR KEY key of the handset for about 2 seconds.
You will hear a beep tone, the LOCK ICON will appear on the top of display, "HS LOCKED" will
appear on LCD. While the keypad is locked, any key you press is invalid.
To unlock the keypad
Press and hold the STAR key of the handset for about 2 seconds again.
You will hear a beep tone, the LOCK ICON will disappear from the display and it will go back
to idle mode.
3
WARRANTY TERMS AND CONFORMITY DECLARATION
FONEXION SPAIN S.A. declares that the phone system DECT+CORDED phone ITCOMBO100
is in compliance with the essential requirements and other relevan provisions of Directive
1999/5/CE. It's possible for you to download a complete copy of this declaration on the website:
http://www.fonexion.com/doc
The ITCOMBO100 is guaranteed for 12 months from the date of purchase on your sales receipt*
but does not cover any faults or defects caused by accidents, misuse, fair wear and tear,
neglect, lightning, tampering with the equipment, or any attempt at adjustment or repair other
than through approved agents. Please keep your sales receipt (is your warranty)
* Or the warranty which is legally applicable in each country.
47
EN