Publicité
Les langues disponibles
Les langues disponibles
ITCOMBO100
Press SET/OK key. Using the direction keys to select AUTO ANSWER
Press SET/OK key to enter.
Press the direction keys to select ON or OFF
Press SET/OK key to confirm your selection.
BARRING
You can set 4 numbers (up to 4 digits each) for call barring.
When the call barring is "ON", any numbers beginning with the programmed digits will not be
able to be dialed out, and LCD will display CALLS BARRED
Press SET/OK key. Using the direction keys to select BARRING
Press SET/OK key the user will be prompted to enter the PIN code, input 4-digit code
(defaulted as 0000).
Press SET/OK key to enter, then using the direction keys key to select ON or OFF, press
SET/OK key to confirm.
If select ON, the display shows NUMBER 1, press the direction keys to choose
NUMBER i (i=1~4).
Then press SET/OK to confirm, using the numerical key to input numbers (maximum 4
digits) you want to barring.
Press SET/OK key to confirm.
Repeat the above steps to set the rest of 3 groups.
DATE & TIME
The user is able to set the date and time on the handset, by selecting the following option.
Press SET/OK key. Using the direction keys to select DATE&TIME,
Press SET/OK key and the last two digits of the year flashes.
Edit the year by pressing the direction keys. Then use SET/OK key to confirm and enter
the month value setting.
Using the same method for month, date and time setting.
Notes: The date and time will be automatically set when the caller ID message is received in
FSK. If the time and date are set on cordless handset, it will automatically be set on the base
unit, and vice-versa.
SELECT BASE
The handset can be registered to more than one base (up to a maximum of 4), and you can
select which base you want the handset to operate with.
If you select "AUTO", the handset will link with the first of the registered bases that it
finds.
Press SET/OK key, then using the direction keys to choose SELECT BASE.
Press SET/OK key and the LCD displays BASE 1 + .
Press the direction keys to select base (BASE 1~4) or AUTO.(Note: the handset will only
link with base number followed by a "+")
Press SET/OK to begin searching, if you hear a sound of "di-du-di", means linked
successful.
HANDSET DEFAULT :
This function allows you to restore the handset to its default settings. The handset menu
settings will be returned to their initial default settings, the CID and outgoing call lists will
42
EN
USER GUIDE
Publicité
