Greencut MH202-4 Manuel D'utilisation page 52

52
No-load speed
Travel
Accessories
Sound pressure level
Sound power level
Vibration
No-load speed
Sanding pad
Accessories
Sound pressure level
Sound power level
Vibration
NOTE: GREENCUT reserves the right to modify the technical data without prior notice.
BOX CONTENTS
1. Double speed hammer drill
2. Oscillating tool head
3. Jig saw head
4. Mouse sanding head
• Remove the product and accessories from the box. Make sure all items are present.
• Inspect the product to ensure that it has not been broken or damaged in transit.
• Do not discard the packaging material until you have carefully inspected and satisfactorily used the product.
ATTENTION: If any part is missing or damaged, contact the Official Technical Service. Do not use
this product without having replaced the missing or damaged part. Using this product with
damaged or missing parts can cause serious injury to the operator.
JIGSAW HEAD
0-3000/min
15mm
1 wood saw blade (HCS 150/6 TPI)
1 mental saw blade
76.4 dB(A) K= 3 dB(A)
87.4 dB(A) K=3 dB(A)
Wood: ah, B=6,7m/s2, K=1,5m/s2
Sheet metal: ah, M=6,4m/s2, K=1,5 m/s2
MOUSE SANDING HEAD
0-9000/min
138X97mm
2 sanding sheets (1x P 60, 1x P 120)
88.6 dB(A) K=3 dB(A)
99.6 dB(A), K=3 dB(A)
4.572 m/s2, K=1.5 m/s2
5. Battery
6. Charger
7. Box