46
All information in this manual is relevant to your own safety and that of your environment. If you have any questions
about the information contained in this manual, consult a professional or contact the Official Technical Service.
The following information on hazards and precautions includes the most likely situations that may arise during use of
this machine. Consult all product documentation, packaging and labels before use.
If you encounter a situation not described in this manual, use common sense to use the machine as safely as possible
and if you see danger, do not use the machine.
USERS
•
This product has been designed to be handled by users of legal age who have read and understood these
instructions. Do not allow underage persons or persons who do not understand these instructions to use the
product.
•
Before using this product, familiarize yourself with it. Make sure you know where all the controls are, the safety
devices and how they should be used.
•
If you are an inexperienced user we recommend that you practice doing simple work and, if possible, in the
company of an experienced person.
PERSONAL SAFETY
•
Do not force this machine. Use this machine, accessories, tools, etc. in accordance with these instructions, taking
into account the conditions and the work to be performed. Using this machine for other than its intended
purpose may cause a hazardous situation.
•
Be alert, watch what you are doing when operating this machine.
•
Do not operate this machine when you are tired or under the influence of drugs, alcohol or medication.
•
Check that all safety features are installed and in good condition. Do not operate this machine if any of its
components are damaged.
•
Avoid unintentional starting. Make sure the switch is in the off position before connecting the power supply and/
or battery pack, and before picking up or carrying the tool. Carrying power tools with your finger on the switch
or activating power tools with the switch on causes accidents.
•
Always maintain proper foot support and operate the machine only when it is on a fixed, stable and level surface.
Slippery or unstable surfaces may cause loss of balance or loss of control of the machine.
•
Remove any adjusting key or wrench before turning the power tool on. If a wrench or spanner is left attached to
a rotating part of the power tool, personal injury may result.
•
Always hold the machine by the handles with both hands.
•
Do not operate the machine in the rain or in extremely wet conditions.
•
Do not use this machine if any of its components are damaged.
•
To avoid unintentional starting of the machine, make sure that the machine and power supply switches are in the
OFF position before connecting or moving the product.
•
Ensure that the charger cable is securely located so that it will not be stepped on or tripped over and is not subject
to damage or stress.
WORK CLOTHES
•
Dress appropriately. Do not wear loose clothing or jewelry that may get caught in moving parts. We recommend
the use of:
-
Eye protection (safety glasses).
-
Hearing protection.
-
Hand protection (resistant and non-slip gloves).