Husqvarna ROYAL 53S Manuel De L'utilisateur page 11

How to Mow
1. Always use the correct
mowing position (M1).
2. Start mowing from the
outside edge of the
lawn, mowing in strips in
alternate directions
(M2).
3. Mow twice a week in the
growing season, your
lawn will suffer if more
that one third of its
length is cut at one time
and this may also result
in poor collection.
Cutting Height
Adjustment
1. The height of cut is
altered by pulling the
adjustment lever away
from the location slots
and moving to the
selected position (M3).
IMPORTANT
Do not attempt any maintenance on your
lawnmower when the engine is hot.
IMPORTANT
Never use water for cleaning your lawnmower.
Do not clean with chemical, including petrol, or
solvents - some can destroy critical plastic parts.
Cleaning
1.Remove grass from
under the deck with a
brush (N1 and N2).
2.Using a soft brush -
remove grass clippings
from the engine air intakes
and exhaust (N3), cutting
height adjustment area.
(N4), around the wheels
(N5) and the grassbox
(N6).
3.Wipe over the surface of
your lawnmower with a dry
cloth.
USE - MOWING
M1
M2
M3
MAINTENANCE
N1
N2
Emptying the Grassbox
1. Lift the safety flap (M4)
2. Remove the grassbox from the machine (M5)
3. Empty grassbox.
M4
Please Note:-
Do not overload your Lawnmower
When mowing in long thick grass a first cut with
the cutting height adjusted to its highest setting,
see Cutting Height, will help reduce engine
overload and will help prevent damage to your
lawnmower.
N3
N5
M5
N4
N6
6 - English