Pregnancy Display; Fever And High Temperature; Measurement Button Pressed Without Sensor At Point Of Measurement - uebe cyclotest baby Mode D'emploi

Frequently asked questions

Pregnancy display?

cyclotest® baby is waiting for your cycle start. In this case, there are
two possibilities:
1) You have forgotten to start a new cycle on the first day of
menstruation.
2) If there is no menstruation, you may be pregnant.
Important: If within a cycle you observe inexplicable temperature re-
sponses which deviate from your previous cycles, call the cyclotest®
service hotline.

Fever and high temperature?

An atypical increase in temperature is blanked out during the cycle re-
cording. If there are not enough temperature values that can be evalu-
ated during a cycle, the fertile phase is extended. See Fig. no. 11 "H".
Measurement button pressed without sensor at point
of measurement?
cyclotest® baby breaks off the measurement and signals this acousti-
cally with three beeps and optically with an "E". See Fig. no. 13.
Fig. no. 28
EN-72