Medline MDS400ELB Manuel Du Propriétaire page 16

• The operator of the lift shall inspect the Medline Lift before each use. Check all
bolts for tightness. Make sure the base can be easily widened, and that all lift parts
are in place. Make sure that casters can be turned freely, and that caster brakes
can be engaged. Make certain all necessary items (i.e. slings, and wheelchairs, etc.)
are ready for use.
• At least once a month, the lift should be thoroughly inspected by a person qualified
to recognize any signs of wear and tear, and looseness of bolts or parts. Replace
any worn parts immediately.
• To lubricate, put a drop of oil on the following points when the Medline Lift is
placed into service and every month thereafter: Top of Mast, Spreader Hinge, and
Caster Axles.
Boom & Spreader Bar
Check connections between boom and
spreader bar for improper connection,
Check connections between boom and
mast for improper connection, looseness
or wear.
Check the boom for bending
and deflection.
Mast
Check the mast for bending or deflection.
Base & Foot Pedal
Check bolts and nuts for looseness.
Check casters and axle bolts for tightness.
Check rubber parts on the casters for
deflection.
Apply grease to caster ball bearings
if needed.
Check welding joints for rust and crack.
Actuator & Control Box
Make sure the control box is firmly affixed
to the mast.
Make sure the actuator is secured to the
boom and mast with pins and key rings.
Make sure actuator plug into control box
is not loose.
Sling & Sling Hardware
Check sling for wear.
Check sling hardware every time
before use.
Lift Cleaning
MEDLINE MDS400ELB, MDS600ELB | PIC-00364 (Rev: 10-13-20)
16
First Received
As Needed.
Monthly Every 3 Months
As Needed. As Needed.