HOLL'S HL-PW02 Manuel D'installation page 7

Read the assembly instructions carefully before starting.
Choice of location
Holl's saunas are designed solely for interior installation.
Select a space:
• Inside, in a dry area, on a flat stable surface that can support the weight of your sauna.
• The height must be sufficient for you to reach the ceiling and carry out electrical connections and maintenance.
• Away from any source of water, flames or flammable materials.
Practical advice
• Note that sauna assembly requires 2 or 3 adults.
• Clearly identify each panel before you begin.
• During assembly, position your sauna's mains cable so that it is easily accessible.
• Note that there are variations between the models.
•
IMPORTANT:
•
Please check the countersink and hole diameter of the drill holes to avoird damaging the wood.
•
The minimum room height required for installation is 2020 mm.
Tools needed
Phillips
Screwdriver
Pencil
Spiral Drill
Allen Wrench
Installation
Tape measure
Cutter
Hammer
Spirit level
EN
Step ladder
Electric drill
7