Using The Sauna - HOLL'S HL-PW02 Manuel D'installation

Connect the power unit to wall outlet, the LED indicator will start to blink on the display.
Now it is possible to switch on the infrared heaters, the light and the music function.
1. Startup
Press to switch on the display and heaters start to work, the length of time is automatically set to 60 minutes and the air
temperature inside the cabin will be displayed. Press
2. Temperature settings
Press again to start heaters.
Press / to set the desired temperature from 35°C to 65°C, 1 push= 1°C.
The setting number blinks 10 seconds then automatically presents the air temperature.
Press and at the same time to interchange °F/°C.
Arrived at the desired temperature, the heaters will stop working automatically.
When it fall 2°C below the desired temperature, the cabin will restarted automatically.
Note:
The maximum air temperature reachable in the cabin may be lower than the desired temperature. This is dependent on the
temperature outside the cabin. Default temperature = Last temperature requested.
Time settings
Press the button or
When the time display - - , heaters continue working, when the time left 1min, it will alarm.
When countdown to 00, the heaters will shut off automatically.
Default time = last memory time.
Color light
Short press , you can open and close the light. Long press
L1 White, L2 pink, L3 Blue, L4 Sky blue, L5 Green, L6 Yellow, L7 Red, L8 Automatically cycling mode, L9 Gradual Change.
Note : open and close the outside light if equiped.
MP3 player
You can select the mode by short pressing the
(empty).
USB/SD or Bluetooth mode: You can select songs by short pressing the
pressing the or
FM radio mode: Long press
select station by short pressing the
14

Using the sauna

ON / OFF
Color Light
Temperature
Temperature
Time
Time
, you can set the desired time from 1 min to 60 min. Interval 1min.
button : USB or MMC CARD (if have) --- Bluetooth --- FM radio -- LINE
. The key for pause.
to search stations (87.5 MHz - 108 MHz) automatically, the system will save all of them. You can
or and adjust the volume (0 - 32) by long pressing the
+
-
+
-
again switch off the heaters.
to set the desired color (7 colors).
or and adjust the volume (0 - 32) by long
or .