KERN and SOHN MCC 250K100NM Mode D'emploi page 68

Procedure:



Press









(example)

32
In weighing mode, press
Press , [Pin] is displayed
, and
Press , „P2 CAL" will be displayed
Operate adjustment switch; for position see chap.15
Press , [dESC] is displayed
Press repeatedly until [CAL] will be displayed.
Confirm with , [UnloAd] appears
Ensure that there are no objects on the weighing pan.
Wait for stability display "STABLE", then confirm with
The size of the currently set adjustment weight will be
displayed.
To change, select the digit to be altered by
numerical value by
Confirm with , [LoAd] appears.
repeatedly until [tCH] appears.
subsequently, [P1 SPd] will appear
.
MCC-BAPS-e-1811
, and the