Initial Commissioning; Operation; Weighing - KERN and SOHN MCC 250K100NM Mode D'emploi

7.9 Initial Commissioning

In order to obtain exact results with the electronic balances, your balance must have
reached the operating temperature (see warming up time chap. During this warming
up time the balances must be connected to the power supply (mains, accumulator or
battery) and be switched on.
The accuracy of the balance depends on the local acceleration of gravity.
The value of gravity acceleration is shown on the type plate.

8 Operation

After taking chair scales to person, ensure scales are level before starting the
weighing process. See diagram below

8.1 Weighing


• However, you can reset the weighing scale to zero by pressing




• If a person is heavier than the maximum weighing range, "OL"
20
Start balance by pressing
The balance will carry out a segment test.
The scales are ready for operation as soon as the weight
display for "0.0kg" has appeared.
the key.
Seat person in the centre of the seat pan.
Fold down the foot rests and place the person's feet on the
respective foot rest.
Wait for stability display "STABLE", then read the weighing
result.
Once the weighing process is completed fold up the foot rests.
(overload) will appear on the display screen.
MCC-BAPS-e-1811