Remote Control; Remote Control Buttons And Functions - Samsung HW-J250 Mode D'emploi

REMOTE CONTROL

REMOTE CONTROL BUTTONS AND FUNCTIONS

Press the D.IN button to select Digital In mode.
If you set the volume to Max or Min, the
Press the Bluetooth button to select Bluetooth mode.
If there is more than one file on the device you are playing, and you press
Press the +# button to pause a file temporarily.
Press the +# button again to play the selected file.
Press the Bluetooth POWER button on the remote to turn the
▶ Installing the Batteries in the Remote Control
1. Use a suitable coin to turn
the remote control's battery
cover counter clockwise to
remove it as shown in the
figure above.
Turns the Soundbar on and off.
Adjusts the volume level of the unit.
,
,
Press the AUX button to select the AUX mode.
the [ button, the previous file is selected.
Bluetooth POWER
Bluetooth Power On function on and off.
See pages 17 and 19 for details.
2. Insert a 3V lithium battery. Keep the
positive (+) pole facing up when
inserting the battery. Put the battery
cover on and align the '●' marks
side by side as shown in the figure
above.
POWER
D.IN
VOLUME
LEDs turn on.
AUX
Bluetooth
Skip Back
Play/Pause
3. Use a suitable coin to turn the
9
REMOTE CONTROL
D.IN
AUX
remote control battery cover
clockwise as far as it will go to
fix it in place.