Usb - Samsung HW-J250 Mode D'emploi

FUNCTIONS

USB

You can play music files located on USB storage devices through the Soundbar.
USB port
1. Connect the USB device to the USB port on the
product.
2. Press the ( ) button on the main unit's top panel
or the USB button on the remote control to select
the USB mode.
The LED will blink indicating that the USB
●
device is not connected yet or the Soundbar is in
stop/pause mode or the USB is in "no data"
mode.
The LED will stop blinking when the USB
●
device has successfully connected.
The Soundbar automatically turns off if no USB
●
device has been connected for more than 5
minutes.
▶ Before you connect a USB device
Be aware of the following:
This product may not be compatible with certain
●
types of USB storage media.
The Soundbar supports the FAT16 and FAT32 file
●
systems.
- The NTFS file system is not supported.
Connect USB devices directly to the USB port of the
●
product. Otherwise, you may encounter a USB
compatibility problem.
Do not connect multiple storage devices to the
●
product via a multi-card reader. It may not operate
properly.
Digital camera PTP protocols are not supported.
●
Do not remove the USB device while it is
●
transferring files.
DRM-protected music files (MP3, WMA) from
●
commercial web sites cannot be played.
External HDDs are not supported.
●
Mobile phone devices are not supported.
●
File Format Type Compatibility list:
●
Format Codec
MPEG 1 Layer2
MPEG 1 Layer3
*.mp3
MPEG 2 Layer3
MPEG 2.5
Layer3
Wave_Format_
MSAudio1
*.wma
Wave_Format_
MSAudio2
AAC
*.aac AAC-LC
HE-AAC
-
*.wav
*.ogg OGG 1.1.0
FLAC 1.1.0,
*.flac
FLAC 1.2.1
20
Display
Sampling Rate Bitrate
80kbps~320kbps
16KHz ~ 48KHz
56kbps~128kbps
48kbps~320kbps
16KHz ~ 96KHz
128kbps~192kbps
24KHz ~ 96KHz 48kbps~64kbps
up to 3000kbps
16KHz ~ 48KHz
50kbps~500kbps
16KHz ~ 96KHz up to 3000kbps