Publicité
Les langues disponibles
Les langues disponibles
Operating the Juicer
1. Place rubber collar and bowl on base over motor shaft.
2. Insert strainer into bowl.
3. Select reamer and push onto motor shaft.
4. Place splash cover on bowl.
5. Plug into grounded electrical outlet.
6. Press power switch to ON (I).
7. Place halved citrus fruit on reamer and hold citrus in place until
all the juice is removed.
NOTES:
• When placing the fruit onto the reamer, make sure your hand touches only the fruit and does not
come in contact with the reamer.
• For best juicing, citrus fruits should be at room temperature.
8. When finished juicing, press power switch to OFF ( ).
Cleaning the Juicer
1. Unplug the juicer.
2. Remove the splash cover, reamer, strainer, bowl, and rubber collar.
3. Remove all pulp and seeds from all parts.
4. Wash all removed parts in a commercial dishwasher or hand wash using warm soapy water. Rinse
and dry.
5. Wipe the base and motor shaft with a clean, damp, soft cloth and dry.
NOTES:
• Do not immerse the base in water.
• Do not allow juice to dry on juicer parts.
• Remove pulp and seeds from parts in between uses.
Troubleshooting Guide
Problem . . .
Solution . . .
Juice will not
• Check to see if the strainer or spout is plugged with seeds or pulp from the last use.
flow through
container spout.
Juicer will not
• Make sure enough pressure is applied to the fruit during operation.
ream fruit.
• Make sure the reamer is pushed all the way down onto the motor shaft.
Motor will not
• Motor has stalled and/or motor cutout switch has opened. Unplug the juicer and allow
run.
the unit to cool.
• Make sure excessive pressure is not applied to fruit during operation.
• Make sure juicer is plugged into outlet and power switch is in the ON (I) position.
Juice has bitter
• Make sure excessive pressure is not applied to fruit during operation.
taste.
• Too much pressure will allow rind in juice, which is bitter.
Citrus Half
5
Publicité
