Setting The Control Box; Warranty; Disposal - Dometic PERFECTVIEW Switch200VTO Instructions De Montage Et De Service

Setting the control box

7 Setting the control box
Switch200VTO must be adapted to certain connection options. Use a dip switch (fig. 5 6,
page 5) to do this.
The dip switch is designed for setting the mirror function and for switching the connected cameras
between long-distance and close-up, provided this function is supported by the selected
cameras: dip switch 1 and 3 set camera 1, dip switch 2 and 4 set camera 2.
➤ Set the dip switches according to the following table:
DIP switch
1 3
OFF OFF
ON OFF
OFF ON
8

Warranty

The statutory warranty period applies. If the product is defective, please contact the
manufacturer's branch in your country (see the back of the instruction manual for the addresses) or
your retailer.
For repair and guarantee processing, please send the following items:
• Defect components
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
9

Disposal

➤ Place the packaging material in the appropriate recycling waste bins wherever possible.
M
If you wish to finally dispose of the product, ask your local recycling centre or specialist
dealer for details about how to do this in accordance with the applicable disposal
regulations.
14
Camera 1
Function
Mirrored
Normal/close-up
Long-distance
DIP switch
2 4
OFF OFF
ON OFF
OFF ON
SWITCH200VTO
Camera 2
Function
Mirrored
Normal/close-up
Long-distance
EN