Huwil E-Verso Mode D'emploi page 35

Remedy
Make sure the control unit is plugged in
Check the connectors have secure contact
Check whether the color codes on the connecting
wires comply with those of the control unit
Carry out matching of remote control / control unit,
see user manual point 6
Replace battery, see point 14
Adjust the mechanical force according to the assembly instructions
Huwilift E-Verso /- Strato/ point 16, E-Senso, point 14
Initiate programming run according to user manual, point 13
35
© HUWIL 02/2009 Huwilift E-Verso / E-Strato / E-Senso/ E-Senso+