Hkoenig KOL6012 Manuel D'utilisation page 9

Installation & Adjustment
1. Installation
Notes:
 Keep this mobile air-conditioner in upright position at least 2 hours before first installation.
 This air-conditioner may be moved indoor conveniently; keep the unit in upright position while
moving it. The air-conditioner shall be placed at flat surface.
 Do not install or operate this air-conditioner in bathroom or other wet environments.
1) Installation of exhaust hose assembly and its adapter.
A. Take out the exhaust hose and its connector and adapter, to remove the plastic bag.
B. Extend one end of exhaust hose, screw the end without slot of round connector onto it with
anticlockwise direction at least 3 laps.
C. Extend another end of exhaust hose, screw the adapter onto it with anticlockwise direction at
least 3 laps.
Note: Screw round connector and adapter into right position, at least 3 laps, to keep good connection
of exhaust hose assembly.
2) Installation of exhaust hose assembly to main unit.
Put front end of exhaust hose assembly onto jugged position of exhaust air outlet at back panel,
fasteners will lock the exhaust hose assembly.
Note:
 Keep the right direction of slant side of adapter, for ease installation of window seal-plate.
 Keep exhaust hose connected in good position.
3) Installation of window seal-plate
A. Make the window half open, put the seal-plate into window, either in vertical or horizontal position.
Fastener
Slot
Exhaust Hose - Assembly