Do not squash the mesh.
Do not hit the mesh with sharp objects or brush.
3. Installation of the filter
Aim the end of the filter toward slot then push filter gently into slot.
Notes:
Be sure to install the filter to side panel then for the filter to back panel.
Install the filter with opposite direction of removal.
Install the filter into place gently to avoid any damage to filter.
4. End of Season Storage
1) Screw off the drain cover and pull out the stopper to drain condensate water completely. (Note: the
tilt angle of the unit must be≦30
2) Keep unit running in fan mode for half day to dry inside of unit completely to prevent from going
moldy.
3) Turn off the unit, pull out plug then wrap the power cord around the wire-winding pillar, insert the
plug into the universal fixing hole at the back panel of the unit, install the water stopper and drain
cover.
Lower filter frame
Push direction
Lower filter
).
Upper Filter frame
Upper Filter
Side filter
Side filter frame