Hkoenig KOL6012 Manuel D'utilisation page 10

B. Extend seal plate parts and adjust it to the length of window, keep both ends to meet window edge,
fix it with screws then.
Note:
 Keep two ends of window seal-plate to meet the window edges well, to assure seal effect.
 Turn the screw in good position.
4) Installation of the unit
A. Move the unit with the exhaust hose assembly installed in front of window and keep the unit at least
50cm away from the walls or other objects.
B. Install the rectangle end of exhaust hose assembly into the corresponding rectangle hole in window
seal-plate assembly, fix it with screw and close the window.
Note:

Slide the adapter downwards and assure adapter installed in good position.

Assure the slant panel direction to match seal-plate direction.

Exhaust hose cannot be bent or with flexure higher than 45°, in order to keep good ventilation
of exhaust hose.