Operation - Kyocera DF-710 Manuel D'utilisation

English

Operation

Sort: ON Mode
Sorts copies of multiple originals into identical
sets.
The following paper sizes can be used in Sort:ON
Mode:
•
1
Select Sort: On Mode on the operation panel of the machine.
2
Load the originals in the Document Processor, or
one at a time on the Platen.
NOTE:
machine for Document Processor and Platen
specifications.
3
Select other features as required and press Start.
4
Copies are ejected onto the specified tray.
If Tray A is selected, each copy set can be offset
from the previous set. Refer to the Operation
Guide for the machine for further details.
The machine displays a message when Tray A,
Tray B and Tray C have reached their tray
capacity. Remove all copies from each tray when
this message is displayed.
NOTE:
differs depending on the size of copy paper being used. For further information refer to
page 36.
5
On completion of the job, remove the copies.
8
A3, B4, A4, A4R, B5, Folio, 11
8 14", 8 13
× ×
1/2 1/2 1/2
8 11", 11 8 ", 8K and 16K
× ×
1/2 1/2
Refer to the Operation Guide for the
The maximum number of copies that can be stored on Tray A, Tray B and Tray C
DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
17",
×
", 8 13",
×
1/2