Alecto AK-20 Guide De L'utilisateur page 32

Snooze function:
While the alarm sounds, press the SNOOZE / LIGHT square on
top of the clock. The alarm signal
will stop and switch to snooze
mode. The snooze icon Z starts
Z
flashing.
When the snooze mode is
activated, the alarm signal will
sound again after 5 minutes. You may activate the snooze
function up to 7 times in a row.
Press a random button (expect the "SNOOZE / LIGHT"
square) to cancel the snooze function beforehand.
To stop the alarm signal:
While the alarm sounds, slide the corresponding alarm switch to
"OFF" to stop the alarm signal.
The alarm clock is now disabled.
Thermometer display:
If the thermometer value is out of the measurement range, the
display will show: LL.L (below the minimum temperature) or
HH.H (above the maximum temperature)
Background lighting:
Press the SNOOZE / LIGHT square on top of the clock to
switch on the background lighting.
The background lighting will turn off after 5 seconds.
Automatic background lighting:
When the switch "AUTO LIGHT" at the rear is set to
"ON", the background lighting illuminates softly when it
becomes dark.
-32-