FISCHER DAREX 715004 Mode D'emploi page 67

The icon (1-Fig.E) appears when the signal is at maximum.
To change the detection depth, press and hold down the (A-Fig.A) button. The depth
changes from 20mm to 38mm.
This mode can detect materials other than wood; it can also detect metal and other
dense materials such as:
n
h
r.
e»
ve
e
s,
Icon Meaning
Idicates that the measured object is a
wooden batten
Indicates that the measured object is
an iron nail
Indicates that the measured object is a
light steel keel
Indicates that the measured object is
a cable
The indicator cannot distinguish
between cables and nails
Indicates the depth detection:
20 mm : by default mode
38 mm : deep mode
67
EN