Publicité
Les langues disponibles
Les langues disponibles
The telephone base station is equipped with an energy−efficient switching power
supply AD−101EB (input 100~240 V
The zero load is approx. 0.3 W. The average efficiency is approx. 68%.
The power consumption of the base station is:
− in operation (standby/talking): approx. 0.6 W / approx. 0.75 W
− when charging the handset: approx. 1.5 W
The charging station(s) supplied with the telephone set is/are equipped with an
energy−efficient switching power supply AD−101EB (input 100~240 V
7.5 V
prox. 68%. The power consumption of the charging station is:
− without handset: approx. 0.3 W
− when charging the handset: approx. 0.75 W
Charging the batteries
Before the handset is used for the first time, insert it in the base/charging station
for at least 15 hours.
When the handset is inserted in the base/charging station properly, you will hear an acoustic
confirmation signal and the charge control lamp lights up. The handset warms up during the
charging process. This is normal and does not represent a risk. Do not charge the handset with
charging units from other manufacturers.
The current battery charge status is indicated in the display:
Full
Setting the display language
Select a language (cf. Menu Structure"):
R > MT EINSTELL > SPRACHE >... (R > HS SETTING > LANGUAGE >...)
Setting the time and date on the handset
The time and date are set via the menu. Refer to Page 61 for the sequence of menu option
selections.
Automatic answering
If this function is activated, an incoming call is taken when the handset is removed from the
base station. Use the menu to activate or deactivate this function. Refer to Page 61 for the se-
quence of menu option selections.
Private branch exchanges
The information on Page 61 explains how to install your telephone in a private branch ex-
change.
Low−radiation (ECO mode) (single pack only)
The level of radiation is considerably lower than that of standard DECT
telephones when in Standby mode (when the handset is on the base station).
Radiation is also reduced in talk mode (depending on the distance between
the handset and base station).
, 300 mA). The zero load is approx. 0.3 W. The average efficiency is ap-
DC
56
Half empty
, output 7.5 V
AC
Low
52
, 300 mA).
DC
AC
Empty
, output
Publicité
