HIKOKI M 12V2 Mode D'emploi page 6

English
5) Service
a) Have your power tool serviced by a qualifi ed
repair person using only identical replacement
parts.
This will ensure that the safety of the power tool is
maintained.
PRECAUTION
Keep children and infi rm persons away.
When not in use, tools should be stored out of reach of
children and infi rm persons.
ROUTER SAFETY WARNINGS
1. Hold the power tool by insulated gripping surfaces
only, because the cutter may contact its own cord.
Cutting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator an
electric shock.
2. Use clamps or another practical way to secure and
support the workpiece to a stable platform.
Holding the work by your hand or against the body
leaves it unstable and may lead to loss of control.
3. Single-hand operation is unstable and dangerous.
Ensure that both handles are gripped fi rmly during
operation. (Fig. 24)
4. The bit is very hot immediately after operation. Avoid
bare hand contact with the bit for any reason.
5. Use bits of the correct shank diameter suitable for the
speed of the tool.
DESCRIPTION OF NUMBERED ITEMS
(Fig. 1–Fig. 24)
Lock pin
Wrench
Loosen
Tighten
Stopper pole
Scale
Quick adjustment lever
Depth indicator
Pole lock knob
Stopper block
Counter-clockwise
direction
Loosen the lock lever
Knob
Fine adjustment knob
Clockwise direction
Cut depth setting screw
Screw
Template guide adapter
Centering gauge
Collet chuck
Template guide
Screw
Template
Bit
Straight guide
Guide plane
Bar holder
Feed screw
Guide bar
Wing bolt (A)
Wing bolt (B)
Tab
Dust guide
Screw
Dust guide adapter
Dial
Stopper bolt
Spring
Separate
Router feed
Workpiece
Rotation of bit
Trimmer guide
Roller
6
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
M12V2: Router
To reduce the risk of injury, user must read
instruction manual.
Always wear eye protection.
Always wear hearing protection.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive
2012/19/EU on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools
that have reached the end of their life must
be collected separately and returned to an
environmentally compatible recycling facility.
Disconnect mains plug from electrical outlet
Class II tool
STANDARD ACCESSORIES
(1) Straight Guide ..............................................................1
(2) Bar Holder ....................................................................1
Guide Bar .....................................................................2
Feed Screw ..................................................................1
Wing Bolt .....................................................................1
(3) Dust Guide ...................................................................1
(4) Dust Guide Adapter .....................................................1
(5) Template Guide ...........................................................1
(6) Template Guide Adapter ..............................................1
(7) Centering Gauge ..........................................................1
(8) Knob ............................................................................1
(9) Wrench ........................................................................1
(10) 8 mm or 1/4" Collet Chuck ............................................1
(11) Wing Bolt (A) ...............................................................4
(12) Lock Spring .................................................................2
Standard accessories are subject to change without notice.
APPLICATIONS
○ Woodworking jobs
chamfering.
centered on grooving and