Settings - Becker Centronic TimeControl TC42 Notice De Montage Et D'utilisation

Assembly and Operating Instructions

Settings

SETTINGS
The following settings can be made via the SETTING menu:
• HOLIDAY
• INTERMEDIATE POSITION
• VENTILATION/REVERSE
• PROG (END LIMIT, INTERMEDIATE POSITION, VENTILATION/REVERSE)
• Select language (ENGLISH)
• ASTRO SHIFT t
• Select town/city (LONDON)
• LENGTH (Displayed in EXPERT MODE only)
• WIDTH (Displayed in EXPERT MODE only)
• TIME ZONE (Displayed in EXPERT MODE only)
• SUMMER/WINTER (Automatic clock adjustment for daylight saving changes)
To set a function, press the OK button until you come to the required menu level.
HOLIDAY SETTING
The holiday setting simulates an occupied house while you are on holiday.
If the function is activated (ON), the roller shutter/venetian blind varies randomly
from the programmed times (max.+ 30 min).
END LIMIT
The end limit is the point where the roller shutter/venetian blind is in the upper
or lower position.
INTERMEDIATE POSITION
The intermediate position is a position of the roller shutter/venetian blind be-
tween the upper and lower limits that can be freely selected. This position can
also be reached from the upper position after programming.
Press the DOWN button twice in rapid succession to move to the intermediate
position.
VENTILATION/REVERSE
The ventilation/reversing position is a position of the roller shutter/venetian blind
between the upper and lower limits that can be freely selected. Using this func-
tion, you can raise the shutter from the lower end limit until the ventilation slits
are open. The slats of the venetian blind will be turned.
Press the UP button twice in rapid succession to move to the ventilation/revers-
ing position.
Language (GB ENGL)
Your national language can be selected via this menu option.
34