Explanations - Becker Centronic TimeControl TC42 Notice De Montage Et D'utilisation

Selecting roller shutter
When the roller shutter function is used, the roller shutter remains locked after a
control button has been activated.
Selecting venetian blind
When the venetian blind function is being used, the venetian blind moves in
non¬maintained command mode in order to allow the slats to be positioned
more precisely. If you press and hold a control button for longer than 1 second,
the venetian blind will remain locked.
After the programmed intermediate position respectively lower final position has
been reached, the slats will be automatically adjusted (provided the reverse po-
sition has been programmed).
Manual/Automatic sliding switch
When the sliding switch is switched to " ", only manual control commands are
carried out (e.g. by pressing the UP, STOP and DOWN buttons).
When the sliding switch is switched to " ", automatic control commands are
carried out (e.g. switching time, astro evening function,...)
Operating mode
The time and the current operating mode, e.g. HOLIDAY, can be seen on the
display.
OK button
When the OK button is pressed, the currently displayed values are saved.
+/- Buttons
The following features can be operated using the + and - buttons:
• Menu -> Change setting
• AUTO mode -> Request information
• + Button -> Next automatic switching time s
• - Button -> Next automatic switching time t
• Hold - button and OK button pressed -> Astro time t
MENU button
By pressing the MENU button, you can see an overview of the menu or the
operating mode.
The currently displayed values are not saved.

Explanations

de
en
fr
nl
31