Table des Matières
Publicité
5L.
TRANSMISSION BYPASS VALVE: Turn counter
clockwise to open. Turn clockwise to close. Open to
push concrete saw.
5M.
HYDROSTATIC TRANSMISSION PUMP.
5N.
ALTERNATOR/WATERPUMP BELT: Self tensioning.
See John Deere for replacements.
5O.
ALTERNATOR: See John Deere for replacements.
FIGURE 6
6A.
LIFTING BALE: The saw can be lifted from this
6 H
6 G
6 F
6 E
point.
6B.
OIL LEVEL CHECK: Dipstick indicates oil level.
Also an oil fi ll location.
6C.
BELT GUARDS AND SHIELDS: Protects engine,
guards, drives, and cooling fan.
6D.
FRONT GUIDE: Use to locate the path of the
diamond blade on the cutting line.
DO NOT OPERATE ENGINE WITH SHIELDS
REMOVED!
6E.
FAN SHIELDS: Protects engine, cooling fan,
beltdrives and pulleys.
6F.
REAR GUIDE: Use to locate the path of the
diamond blade on the cutting line.
6G.
HANDLEBARS: Used to maneuver the saw. Not
to be used to lift the saw.
6H.
ENGINE OIL FILTER: The Oil fi lter element needs
to be changed when changing oil. (100 hr)
6 A
6 C
6 C
6 B
6 D
53
Publicité
Table des Matières
